Products

The TMM (Torque Measurement Method) sensor is the core element of the Stromer riding experience. This precision component measures the force you apply to the pedals to instantly transmit information to the motor.

Compatible with:

• ST2 Belt Drive

Mounting instructions (PDF)

For Riese & Müller Load 60/75

This OEM kit is the complete solution to replace or install the rear mudguard on your Stromer ST3 or ST5. Unlike a single part, this pack includes all the technical necessities to ensure an installation compliant with "Speed Pedelec" (45 km/h) standards, especially for lighting and license plate management.

Compatibility: Please select the size corresponding to your frame (M, L or XL) to ensure perfect alignment with the wheel and mounting points.

Specifically designed for the CORE models in the 2026 lineup, this “Comfort” kit allows you to adjust the riding position for a more upright and natural posture. Unlike the standard versions, this kit uses a 31.8 mm diameter handlebar to perfectly match the JD stem found on CORE models.

Compatibility :

• Charger5 CORE - 31,8 mm stem
  
• Nevo5 CORE - 31,8 mm stem

Comfort kit stem cover ST3, ST3 Pinion - Stromer

Enhance your riding experience with this official “Comfort” kit, designed to provide an upright and relaxed riding position. This kit is the perfect solution for cyclists looking to relieve tension in their back and wrists, thanks to a deeply curved handlebar and a saddle with a wider seat.

Compatibility :

• Charger5 with R&M custom 25.4mm stem
• Nevo5 with R&M custom 25.4mm stem

Optimize your well-being on the road with this genuine "Comfort" kit. Designed for those who prefer an upright riding position, this pack reduces pressure on the wrists and lower back. The Humpert Trekking handlebar offers a very pronounced angle for a natural grip, while the Lookin Evo Wide saddle ensures a royal seating experience.

Compatibility:

• All generations with 31.8 mm stem

Important Restriction: This kit is not compatible with GX models or models equipped with the Heavy-Duty-Package. These models require reinforced components specific to their approval.

This original Enviolo kit includes a complete replacement freehub body and its threaded locking ring. It is the essential official spare part for refurbishing the drive mechanism of your Enviolo continuously variable hub.

Compatibility:

• All new 5-speed Vario models
• Multicharger 3

Urban ST3, ST3 Pinion Stem Cover Kit - Stromer

20 spoke kit for right rear wheel for ST2 chain - Stromer

Compatible with ST2 rear wheel between 2014 and 2018 with chain, this kit includes 20 spokes and 20 screw nipples.

20 spoke kit for left rear wheel for ST2 chain - Stromer

Compatible with ST2 rear wheel between 2014 and 2018 with chain, this kit includes 20 spokes and 20 screw nipples.

20 spoke kit for front right wheel for ST2 chain - Stromer

Compatible for ST2 front wheel between chain, this kit includes 20 spokes and 20 screw nipples.

20 spoke kit for left front wheel for ST2 chain - Stromer

Compatible with ST2 front wheel with chain, this kit includes 20 spokes and 20 spoke nipples.

Original Riese & Müller parts.
Notice (PDF)

Compatible with Cargo Load and Packster

4 screws + seal kit. Compatible with Bosch Classic+ and Generation 2, 3, 4 motors.

Compatible with:
Charger (1) / Mixed Charger 2014-2018
Charger (2) called NEW CHARGER / NEW Mixed Charger 2018-2020
Charger3/Mixed Charger3 2020-2022
Cruiser/Mixed Cruiser Hybrid (1) 2014
Cruiser/Mixed Cruiser (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(Please note: if not original, compatible with modifications)

Charging port mount kit for Bosch eBike SmartSystem.

Port mount (but not the cover) compatible with the original Riese & Muller port cover.

This official Riese & Müller genuine maintenance kit includes all the essential wear parts to refurbish the steering mechanism of your electric cargo bike.

Compatibility:

• Load
• Packster

Compatible for engine:

Performance Line
Active Line
Active Line Plus

This installation kit allows you to integrate the Bosch Smart System ConnectModule into your e-bike equipped with a Bosch Smart System motor.

This module combines a GPS tracker, an anti-theft device and an intelligent alarm system. It detects any suspicious movement of your bike, locates it in real time and activates a local alarm: short and dissuasive for slight movements, or powerful with activation of GPS tracking in case of movement. The ConnectModule data can be viewed via the eBike Flow app, where the "eBike Alarm" and "eBike Lock" functions can also be activated.

Comes with instructions for use and assembly

This installation kit allows you to integrate the Bosch Smart System ConnectModule into your e-bike equipped with a Bosch Smart System motor.

This module combines a GPS tracker, an anti-theft device, and an intelligent alarm system. It detects any suspicious movement of your bike, locates it in real-time, and activates a local alarm: short and deterrent for slight movements, or powerful with GPS tracking activation in case of displacement. ConnectModule data can be viewed via the eBike Flow app, where "eBike Alarm" and "eBike Lock" functions can also be activated.

Comes with operating and installation instructions

Compatible with motor:

Performance Line CX
Performance Line CX Race Edition
Cargo Line

The “Nyon for Kiox cockpit” retrofit kit is a solution designed for Riese & Müller bicycles equipped with a Bosch Kiox cockpit and an adjustable stem, and allows:

• to replace a broken Kiox cockpit support,
• or to install a Bosch Nyon screen on the same driving position.
• It does not contain  the Nyon screen itself, but also the specific mounting elements (plate, support, fixings) adapted to the Riese & Müller brand and its adjustable stem. It requires the separate screw kit.

✅ Highlights

• Allows you to maintain or restore the elegant and functional integration of the display on the Riese & Müller bicycle, without having to replace the entire cockpit.
• Compatible with the existing Bosch/Kiox system, making it easy to upgrade to the Nyon display.
• Provides a cost-effective solution if only the bracket or fixture is damaged.

⚠️ Some important elements

• Make sure that your bike is a Riese & Müller model with adjustable stem and original Kiox cockpit, so that the "Nyon for Kiox" kit is compatible.
• The Nyon screen is not included in the kit

In summary: this is an excellent choice if you want to replace a broken mount or upgrade to the Nyon screen by reusing your Kiox cockpit on a Riese & Müller bike with an adjustable stem, while preserving visual and technical integration.

This kit allows you to quickly and securely attach your smartphone to almost any smooth, flat, non-porous surface. Designed for use in combination with SP Connect phone cases (SPC system), it offers a versatile mounting solution to keep your screen in view wherever you need it.

Compatibility:

• SP Connect phone cases

3M adhesive backing, supplied with screws and assembly instructions.

Refill kit for 1 oil change

This Rohloff oil change refill kit is designed to make maintaining your Rohloff hub easier and ensure it functions properly all year round.

It includes a bottle of "all-season" oil for optimal lubrication, a bottle of flushing oil for deep cleaning, and a screw with a seal for a quick and efficient draining procedure.

Kit for 1 oil change

This Rohloff oil change kit is designed to make it easier to maintain your Rohloff hub and ensure it operates properly all year round.

It includes a bottle of "all-season" oil for optimal lubrication, a bottle of flushing oil for deep cleaning, as well as a syringe, a hose and a screw with seal for a quick and efficient oil change procedure.

MGU Pinion Oil Change Kit

This oil change kit is designed to make maintaining your Rohloff hub easier and ensure it runs smoothly all year round.
Compatible for:

Homage5 PINION 2025->
Delite5 GT PINION 2025->
Nevo5 PINION 2026->
Charger5 PINION 2026->

Manual controller cable end hardware kit - Enviolo

Compatible with all Riese & Müller vario models.

This expander increases the internal width of the mount from 55 mm to 100 mm, while moving it 41 mm away from the handlebars. This makes it compatible with very wide stems, such as the Riese & Müller Cockpit. It adapts to all clamp sizes.

Maximum load: 7 kg

• 4x Rubber Spacer 25.4 mm
• 4x Rubber Spacer 31.8 mm
• 4x Rubber Spacer 35.0 mm

Compatible with generation 2, 3, 4 motors.

Compatible with Riese & Müller:

Charger (1) / Charger Mixte 2014-2018
Charger (2) called NEW CHARGER / NEW Charger Mixte 2018-2020
Charger3/Charger3 Mixte 2020-2022
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixte) 2019-2020
Multicharger (2) (also mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then Packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(Please note: if not original, compatible with modifications)

Optimize the interior of your Load 60 with this original "Footwell" kit. This equipment transforms the standard cargo bed into a recessed space, offering a much more natural and comfortable seating position for children (no more raised knees). It also includes a clever storage hatch for your personal belongings.

Compatibility:

• Load 60 (2020 - ...)

Instructions: 2023-06-21.4374.221667_VBK0448_Fußraum-Load-60_2023-01-31_D_EN.pdf

Adjustable plastic fixing kit for Riese & Müller mudguards:

Please note not compatible Packster, Swing, Cruiser, Culture, Nevo4, Nevo5, Charger5, Homage4, Homage5, Delite4, Delite5, Superdelite5, UBN, Multicharger2, Multicharger3, Charger4, Roadster4

Also available separately.

This original Stromer kit includes the 27.5" rim, spokes, and nipples for a complete wheel.

Compatible with:

• ST2 Pinion
• ST3 2018 EU 12v (4)
• ST3 (Pinion) 2022 EU (4)
• ST5 2018 EU 12v (4)
• ST5 (Pinion) 2023 EU (4)
• ST5 ABS EU (4)
• ST7 2022 EU (4)

The brake lever kit for Stromer ST3, ST3 Pinion, ST5, ST5 ABS, ST5 Pinion, and ST7 models is designed to offer precise and responsive braking control.

Made from high-quality materials, this kit ensures excellent durability and ideal ergonomics for maximum user comfort. The brake levers provide smooth and immediate control, even in demanding situations, thereby guaranteeing increased safety.

Stromer Antwerp double bag kit compatible with all Stromer bikes.

-Volume: 2 x 20 L

KIT Stromer Barcelona double bag compatible for all Stromer bikes.

-water repellent polyester
-Volume: 2x20 L
-Dimensions: 28x43x17 cm

Compatible with Cane Creek or By.schultz 31.6mm seatposts, not compatible with the original 34.9mm seatpost of the Multicharger Family.

Transform your Multicharger e-bike into a real two-seater with the Riese & Müller passenger kit. This kit includes a cushion that makes the luggage rack comfortable for a second person, a small handlebar with stem, and a footrest, thus providing comfort and safety for the passenger.

Main features:

• Comfortable cushion: Transforms the luggage rack into a comfortable seat.
• Handlebar and footpegs included: Allow the passenger to rest their feet comfortably and add additional support.
• Compatibility: Designed for Multicharger models from 2021.
• Load capacity: Supports up to 65 kg.
• Original Riese & Müller accessories.

To use this kit, it is necessary to install the Multicharger 2021 spoke protector to be ordered separately.

Please note: The mounted seat cushion can support a maximum load of 65 kg.

Assembly instructions (PDF)

Compatible with 34.9mm seatpost (without suspension), not compatible with 31.6mm Cane Creek or By.schultz seatposts.

This passenger kit is perfect for your Multitinker from Riese & Müller, designed to transport older children (over 7 years old) or adults weighing up to 65 kg.

Ensure that the bike is equipped with a spoke protector to ensure the safety of transported children.

Delivery includes all necessary mounting parts and detailed instructions. Assembly is quick and easy, allowing you to quickly enjoy your new passenger kit.

Assembly Instructions (PDF)

This kit offers a secure solution for installing your PowerTube smart system battery horizontally, ensuring seamless integration with your e-bike frame. Made from durable and robust materials, it provides maximum stability during your rides, even on rough terrain.

Compatible with:

Homage4 (4) 2024-2026
Multitinker (1) 2023->2025
NEVO4 (4) 2024-2025

This kit provides a secure solution for vertically installing your PowerTube battery, ensuring perfect integration with your electric bike's frame. Designed with durable and resistant materials, it guarantees maximum stability during your rides, even on rough terrain.

Comes with screws and mounting instructions. Compatible with Gen 2, 3, 4 motors.

Compatible with:

Charger (2) called NEW CHARGER / NEW Charger mixte 2018-2020
Charger3/charger3 mixte 2020-2022
DELITE (3) 2020->
Multicharger (1) (also mixte) 2019-2020
Multicharger (2) (also mixte) (pre-Multicharger2 2021-2023
PACKSTER70 2021-2024
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->

This kit offers a secure solution for vertically installing your PowerTube smart system battery, ensuring perfect integration with your e-bike frame. Designed with durable and resistant materials, it ensures maximum stability during your rides, even on rough terrain.

Compatible with:

Charger4 /Charger4 mixte 2023->
DELITE4 (4) 2024->
Multicharger2 (3) 2024->
NEVO4 (4) 27,5” 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT 2025->

The Kiox screw kit for Bosch eBike System 2 is designed for a secure and reliable installation of your Kiox display. This complete kit includes an M3x6 screw for the connector, an M4x6 screw for the mounting plate, an M3x6.5 screw for anti-theft security, and a security nut.

Compatible with:
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
NEVO (2) 2019-2020
NEVO (3) 2021-2024

Original Stromer parts

Can be used on all light gray textiles, such as your bags. Glue on or sew on. Riese & Müller

Compatible with: Riese & Müller

Can be used on all dark gray textiles, such as your bags. Glue on or sew on. Riese & Müller

Compatible with: Riese & Müller

Can be used on all grey-green textiles (Load child seats, Load 60/75 hood, Load 60 child hood). Can be glued or sewn. Riese & Müller

Compatible with: Riese & Müller

Can be used on all black textiles, such as your bags. Glue on or sew on. Riese & Müller

Compatible with: Riese & Müller

Original Stromer freewheel kit for ST1, chain ST2, chain and pinion ST3, ABS and Pinion ST5, and ST7.