Bosch eBike

Kit 4 screws + seal. Compatible with Classic+ and generation 2, 3, 4 engines.

Compatible with:
Charger (1) / mixed charger 2014-2018
Charger (2) called NEW CHARGER / NEW Charger mixed 2018-2020
Charger3/charger3 mixed 2020-2022
Cruiser/Cruiser Mix Hybrid (1) 2014
Cruiser/Mixed Cruiser (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(attention if not original, compatible with modifications)

The Bosch eBike SmartSystem Charging Socket Holder Mounting Kit is a complete set designed to facilitate the installation and protection of the charging socket on your Bosch eBike.

It includes a charging socket holder, a protective cap, two M3x14 countersunk screws for secure attachment, and a 24x2 O-ring to ensure optimum sealing. This kit ensures a reliable installation, protecting the charging socket from dust and moisture while providing easy access when charging.

Compatible for:

CARRIE 2024->
Charger4 /Charger4 mixed 2023->
Cruiser2 / Cruiser2 Mixed (3) 2023->
Culture / Mixed Culture (3) 2024->
DELITE4 (4) 2024->
Homage4 (4) 2024->
LOAD4 60 (4) 2023->
LOAD4 75 (3) 2023->
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->
Multitinker (1) 2023->
NEVO4 (4) 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT >
ROADSTER4 (4) 2024->
Swing4 2024->
Tinker2 (4) 2023->
Transporter2 65/85 2023->

This installation kit allows you to integrate the Bosch Smart System ConnectModule into your e-bike equipped with a Bosch Smart System motor.

This module combines a GPS tracker, an anti-theft device and an intelligent alarm system. It detects any suspicious movement of your bike, locates it in real time and activates a local alarm: short and dissuasive for slight movements, or powerful with activation of GPS tracking in case of movement. The ConnectModule data can be viewed via the eBike Flow app, where the "eBike Alarm" and "eBike Lock" functions can also be activated.

Comes with instructions for use and assembly

Compatible for engine:

Performance Line
Active Line
Active Line Plus

This installation kit allows you to integrate the Bosch Smart System ConnectModule into your e-bike equipped with a Bosch Smart System motor.

This module combines a GPS tracker, an anti-theft device and an intelligent alarm system. It detects any suspicious movement of your bike, locates it in real time and activates a local alarm: short and dissuasive for slight movements, or powerful with activation of GPS tracking in case of movement. The ConnectModule data can be viewed via the eBike Flow app, where the "eBike Alarm" and "eBike Lock" functions can also be activated.

Comes with instructions for use and assembly

Compatible for engine:

Performance Line CX
Performance Line CX Race Edition
Cargo Line

• 4x Rubber spacer 25.4mm
• 4x Rubber spacer 31.8mm
• 4x Rubber spacer 35.0 mm

Compatible with generation 2, 3, 4 engines.

Compatible with:

Charger (1) / mixed charger 2014-2018
Charger (2) called NEW CHARGER / NEW Charger mixed 2018-2020
Charger3/charger3 mixed 2020-2022
Cruiser/Cruiser Mix Hybrid (1) 2014
Cruiser/Mixed Cruiser (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(attention if not original, compatible with modifications)

This kit offers a secure solution to install your PowerTube battery vertically, ensuring perfect integration with the frame of your electric bike. Designed with durable and resistant materials, it ensures maximum stability during your rides, even on rough terrain.

Supplied with screws and assembly instructions. Compatible with generation 2, 3, 4 engines.

Compatible with:

Charger (2) called NEW CHARGER / NEW Charger mixed 2018-2020
Charger3/charger3 mixed 2020-2022
DELITE (3) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
PACKSTER70 2021-2024
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->

This kit offers a secure solution to install your PowerTube smart system battery vertically, ensuring perfect integration with the frame of your electric bike. Designed with durable and resistant materials, it ensures maximum stability during your rides, even on rough terrain.

Compatible with:

Charger4 /Charger4 mixed 2023->
DELITE4 (4) 2024->
Multicharger2 (3) 2024->
NEVO4 (4) 27.5” 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT 2025->

The Kiox screw kit for Bosch eBike System 2 is designed for a secure and reliable installation of your Kiox display. This complete kit includes an M3x6 screw for the connector, an M4x6 screw for the mounting plate, an M3x6.5 screw for anti-theft security, as well as a security nut.

Compatible with:
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
NEVO (2) 2019-2020
NEVO (3) 2021-2024

Compatible with KIOX 300, KIOX 500 and SmartphoneGrip Smart System displays, this kit keeps your digital tools within sight during all your outings.

This kit includes a sturdy handlebar mount, designed to fit 31.8mm handlebars, as well as a reliable connection cable and an easy-to-install display mount. It ensures smooth use of your navigation system, riding statistics or smartphone apps.

Compatible for:

CARRIE 2024->
Charger4 /Charger4 mixed 2023->
Cruiser2 / Cruiser2 Mixed (3) 2023->
Culture / Mixed Culture (3) 2024->
DELITE4 (4) 2024->
Homage4 (4) 2024->
LOAD4 60 (4) 2023->
LOAD4 75 (3) 2023->
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->
Multitinker (1) 2023->
NEVO4 (4) 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT 2025>
ROADSTER4 (4) 2024->
Swing4 2024->
Tinker2 (4) 2023->
Transporter2 65/85 2023->

The Kiox screw kit for Bosch eBike System 2 is designed for a secure and reliable installation of your Kiox display. This complete kit includes an M3x6 screw for the connector, an M4x6 screw for the mounting plate, an M3x6.5 screw for anti-theft security, as well as a security nut.

Compatible with:

Charger (1) / mixed charger 2014-2018
Charger (2) called NEW CHARGER / NEW Charger mixed 2018-2020
Charger3/charger3 mixed 2020-2022
Cruiser/Cruiser Mix Hybrid (1) 2014
Cruiser/Mixed Cruiser (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(attention if not original, compatible with modifications)

Fixing kit including 1 M3x6 screw (fitting) and 2 M2.5x5 safety screws (universal bracket). Compatible with generation 2, 3 and 4 engines, it ensures a secure and reliable installation.Compatible with:

Charger (1) / mixed charger 2014-2018
Charger (2) called NEW CHARGER / NEW Charger mixed 2018-2020
Charger3/charger3 mixed 2020-2022
Cruiser/Cruiser Mix Hybrid (1) 2014
Cruiser/Mixed Cruiser (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(attention if not original, compatible with modifications)

The Bosch eBike Drive Unit Screw Kit is designed to provide a strong and secure fit for the drive unit on your eBike. This kit contains all the screws needed for a reliable installation. It is compatible with a wide range of Bosch motors, including Active Line, Performance Line, Performance Line CX, Active Line Plus (generation 2, 3 (BES2)), Performance Line SmartSystem models, guaranteeing perfect compatibility and optimum durability.

The drive unit screw kit for Bosch eBike is specially designed for the Performance Line, CX, Speed ​​and Cargo motors (generation 4 (BES2), 3 SmartSystem). It includes 6 M8x16 screws required for a solid and secure attachment of the drive unit to your e-bike.

The Bosch LED Remote connects your eBike to the Bosch eBike Flow app, allowing you to easily access all important riding data, such as distance travelled, directly on your smartphone and share it with other users. You can also perform software updates yourself.

Main features of the Bosch LED Remote:

• Screen readable in all light conditions
• Intuitive and ergonomic use
• Long-lasting and replaceable battery
• Walk Assist function for easier pushing
• Compatible with Bosch Smart system
• Stand not included (sold separately)

Compatible for:

CARRIE 2024->
Charger4 /Charger4 mixed 2023->
Cruiser2 / Cruiser2 Mixed (3) 2023->
Culture / Mixed Culture (3) 2024->
DELITE4 (4) 2024->
Homage4 (4) 2024->
LOAD4 60 (4) 2023->
LOAD4 75 (3) 2023->
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->
Multitinker (1) 2023->
NEVO4 (4) 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT 2025>
ROADSTER4 (4) 2024->
Swing4 2024->
Tinker2 (4) 2023->
Transporter2 65/85 2023->

Remote control lever for Intuvia display, compatible with the Bosch eBike System 2 (BES2). Allows easy and intuitive control of the display functions, ensuring convenient and safe use during your journeys.

Not compatible with the Nyon remote control.

Compatible with generation 2, 3, 4 engines.

Compatible with:

Charger (1) / mixed charger 2014-2018
Charger (2) called NEW CHARGER / NEW Charger mixed 2018-2020
Charger3/charger3 mixed 2020-2022
Cruiser/Cruiser Mix Hybrid (1) 2014
Cruiser/Mixed Cruiser (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(attention if not original, compatible with modifications)

The CompactTube axial secondary locking mechanism for Bosch eBike SmartSystem is designed to enhance the security of the CompactTube battery by ensuring a solid fixation in the axle. This axial locking system ensures that the battery remains firmly in place, even during the most demanding rides.

The CompactTube Pivot Secondary Locking Mechanism for Bosch eBike SmartSystem is designed to provide additional security for the CompactTube battery. This pivoting locking system provides a stable and reliable attachment, ensuring that the battery remains securely in place, even when riding over rough terrain.

The Bosch eBike SmartSystem axial lock cover is designed to protect the lock opening when no lock is installed. It provides effective protection against dust, dirt and moisture, thus preserving the longevity of the locking mechanism.

The 15-tooth drive sprocket for Bosch eBike System 2 is specially designed to provide precise and responsive transmission on e-bikes equipped with Bosch Active Line, Performance Line and Performance Line CX (generation 2) motors.

With its 15 teeth, it allows efficient power transfer from the motor to the chain, optimizing the performance of your eBike, especially on climbs or during rapid acceleration.

The 18-tooth drive sprocket for Bosch eBike System 2 is designed to ensure smooth and efficient transmission on bikes equipped with Bosch Active Line, Performance Line and Performance Line CX (generation 2) motors. This sprocket ensures optimal transfer of power from the motor to the chain, improving the performance and efficiency of your eBike.

This pack of two CR2016 (90mAh) batteries is designed to power your Purion display with long-lasting and reliable performance. These lithium batteries guarantee a long battery life for your display, ensuring continuous use without interruption.Compatible with:

Charger (1) / mixed charger 2014-2018
Charger (2) called NEW CHARGER / NEW Charger mixed 2018-2020
Charger3/charger3 mixed 2020-2022
Cruiser/Cruiser Mix Hybrid (1) 2014
Cruiser/Mixed Cruiser (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(attention if not original, compatible with modifications)

The long straight mounting plate for Bosch Cargo/Performance motor is designed to ensure a solid mounting of Bosch Cargo Line and Performance Line (SmartSystem) motors. This part guarantees optimum stability and safety of the motor, even under demanding operating conditions.

The long left mounting plate for Bosch Cargo/Performance motor is an essential part for securely installing Bosch Cargo Line or Performance Line (SmartSystem) motors. Designed to provide a robust and durable fixing, it guarantees the stability and safety of the motor, even during intensive use.

The Bosch eBike System 2 rack battery guide rail is designed to ensure precise and secure positioning of the battery on bikes equipped with a rack. This rail allows the battery to slide smoothly during installation or removal, while maintaining a stable attachment during rides.

Compatible with Generation 2, 3, 4 engines

Compatible with:

Culture (1) 2015-2020
Culture GT (2) 2019-2020
Swing 2014-2019
Swing3 2020-2024

The ABUS standard lock for powerpack frame battery - Bosch eBike SmartSystem is designed to effectively secure the batteries of e-bikes equipped with the Bosch SmartSystem. It guarantees reliable protection of your battery while providing easy and convenient access.

Compatible with the Bosch SmartSystem, this lock ensures a solid and durable fixing, ideal for daily use. Enjoy optimal security for your eBike with this simple and robust solution.

The Bosch PowerTube standard battery lock is designed to effectively secure e-bike batteries. It provides reliable battery protection and allows easy access thanks to its simple and practical mechanism.

Compatible with Active Line, Active Line Plus, Performance Line, Performance Line CX, CX Speed ​​and Cargo (generation 2, 3, 4) motors, this lock guarantees optimum security while facilitating use with a single key system to lock multiple points of your eBike.

Compatible with:

Vertical powertube:
Charger (2) called NEW CHARGER / NEW Charger mixed 2018-2020
Charger3/charger3 mixed 2020-2022
DELITE (3) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
PACKSTER70 2021-2024
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->

Horizontal powertube:
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
NEVO (2) 2019-2020
NEVO (3) 2021-2024

The ABUS Standard Lock for PowerTube 750 - Bosch eBike SmartSystem is designed to effectively secure PowerTube 750 batteries on bikes equipped with the Bosch SmartSystem. It offers reliable protection, ensuring the safety of your battery during your rides.

Compatible exclusively with the Bosch SmartSystem, this lock provides convenient and simplified access while ensuring a solid hold. Ideal for everyday use, it guarantees optimum security for e-bikes equipped with the Bosch SmartSystem.

Compatible with:

Charger4 /Charger4 mixed 2023->
DELITE4 (4) 2024->
Multicharger2 (3) 2024->
NEVO4 (4) 27.5” 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT 2025->

The Bosch SmartSystem compatible XPlus PowerPack frame battery lock is designed to effectively secure your e-bike batteries, while offering great convenience. Thanks to its XPlus cylinder, this lock allows you to use a single key for multiple locking points, simplifying security management.

The Plus Code Card serves as an identifier for locking systems, facilitating key management. Compatible with the Bosch SmartSystem, this lock guarantees reliable and durable protection. Supplied with 2 keys, it ensures optimum security for daily use.

Compatible for:

Carrie 2024->
Cruiser2/Cruiser2 mixed (3) 2023->
LOAD4 60 (4) 2023->
LOAD4 75 (3) 2023->
Tinker2 (4) 2023->
Transporter2 65/85 2023->

The Bosch Powerpack Xplus Battery Lock is designed to effectively secure e-bike batteries. It provides reliable battery protection and allows easy access thanks to its simple and practical mechanism.

The Bosch PowerPack XPlus Frame Battery Lock is designed to effectively secure e-bike batteries. XPlus cylinders allow one key to be used for multiple locks, providing a convenient and secure solution.

Compatible with Active Line, Active Line Plus, Performance Line, Performance Line CX, CX Speed and Cargo (generation 2, 3, 4) motors, this lock guarantees optimal protection of your battery while simplifying access with a single key system for multiple locking points on your eBike.

Compatible with:

Charger (1) / mixed charger 2014-2018
Cruiser/Cruiser Mix Hybrid (1) 2014
Cruiser/Mixed Cruiser (2) 2015-2024
DELITE (1) 2014-2016
DELITE (2) 2017-2019
Homage (1) 2015-2018
Homage (2) 2019-2020
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
NEVO (1) 2016-2018
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

The Bosch XPlus lock for PowerRack luggage rack battery - Bosch eBike System 2 is specially designed to secure batteries mounted on luggage racks. Thanks to its XPlus cylinder, it allows a single key to be used for multiple locks, offering a practical and simplified solution.

Compatible with Active Line, Active Line Plus, Performance Line, Performance Line CX, CX Speed and Cargo (generation 2, 3, 4) motors, this lock ensures optimal protection of your battery. The Plus Code Card serves as an identifier for the locking systems, making key management easier. Supplied with 2 keys, it guarantees maximum security for your electric bike.

Compatible with:

Culture (1) 2015-2020
Culture GT (2) 2019-2020
Swing 2014-2019
Swing3 2020-2024

The ABUS XPlus lock for PowerRack luggage rack battery - Bosch eBike SmartSystem is designed to effectively secure batteries installed on luggage racks. Thanks to its XPlus cylinder, this lock allows a single key to be used for multiple locking points, thus simplifying security management.

Compatible with PowerPack 400 Rack and PowerPack 500 Rack batteries, it guarantees reliable and long-lasting protection. The Plus Code Card serves as an identifier to facilitate key management. Supplied with 2 keys, this lock ensures optimum security for daily use.

Compatible with:

Swing4 2024->

The ABUS XPlus PowerTube Battery Lock - Bosch eBike System 2 is designed to effectively secure PowerTube batteries on e-bikes. Thanks to its XPlus cylinder, it allows a single key to be used for multiple locks, providing a practical and simplified solution.

Compatible with Active Line, Active Line Plus, Performance Line, Performance Line CX, CX Speed ​​and Cargo (generation 2, 3, 4) motors, this lock guarantees optimal protection of your battery. The Plus Code Card serves as an identifier for the locking systems, facilitating key management. Supplied with 2 keys, it ensures maximum security for your eBike.

Compatible with:

Vertical powertube:
Charger (2) called NEW CHARGER / NEW Charger mixed 2018-2020
Charger3/charger3 mixed 2020-2022
DELITE (3) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
PACKSTER70 2021-2024
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->

Horizontal powertube:
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
NEVO (2) 2019-2020
NEVO (3) 2021-2024

The ABUS XPlus lock for PowerTube 750 battery - Bosch eBike SmartSystem is specially designed to effectively secure PowerTube 750 batteries on bikes equipped with the Bosch SmartSystem. Its XPlus cylinder allows you to use a single key for multiple locking points, simplifying the security management of your eBike.

The Plus Code Card serves as a unique identifier for locking systems, facilitating the management and replacement of keys if necessary. Compatible with the Bosch SmartSystem, this lock offers reliable and durable protection. Supplied with 2 keys, it ensures optimum security on a daily basis.

Compatible with:

Charger4 /Charger4 mixed 2023->
DELITE4 (4) 2024->
Multicharger2 (3) 2024->
NEVO4 (4) 27.5” 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT 2025->

The Bosch SmartphoneGrip is the perfect holder for attaching your phone to your Bosch SmartSystem-equipped e-bike. This holder holds your smartphone securely, with or without a case, while providing protection thanks to its rubber surface. The charging port and speaker remain accessible, and your phone can be charged while you ride, either by cable or induction.

The SmartphoneGrip easily attaches to the Kiox 300 display mount, allowing you to switch between the two devices in an instant. If your bike doesn’t already have a Kiox 300 display, installing the SmartphoneGrip is simple: use the Kiox 300 single-arm mount, SmartSystem display interface, and a compatible cable. A complete installation kit is available to make setup easy.

For portrait use, you can add a vertical adapter or a 90° swivel adapter, providing more flexibility for displaying your apps like Bosch eBike Flow or Komoot.

The ConnectModule bracket for Bosch SmartSystem motor is specially designed to securely attach the connection module to e-bikes equipped with the Bosch SmartSystem system.

Compatible with generation 3 SmartSystem engines.

Easily replace your display mount with this genuine Bosch replacement mount, specially designed to securely attach Intuvia and Nyon displays to your e-bike.

Compatible with Bosch Classic+, Active- and Performance-Line motors, this bracket is suitable for all Bosch Nyon and Intuvia displays since 2013. Ensure a stable and durable installation of your display with this original bracket, guaranteeing perfect integration into your E-Bike.

1300 mm cable. Compatible with Classic+ and generation 2, 3, 4 motors.

Compatible with:

Charger (1) / mixed charger 2014-2018
Charger (2) called NEW CHARGER / NEW Charger mixed 2018-2020
Charger3/charger3 mixed 2020-2022
Cruiser/Cruiser Mix Hybrid (1) 2014
Cruiser/Mixed Cruiser (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(attention if not original, compatible with modifications)

For fixing the bracket and the screen.

1x M4x12 screw

Compatible with generation 3 SmartSystem engines

1 M2x3 screw mounting plate for ConnectModule.

Compatible with generation 3 SmartSystem engines.

Compatible for:

CARRIE 2024->
Charger4 /Charger4 mixed 2023->
Cruiser2 / Cruiser2 Mixed (3) 2023->
Culture / Mixed Culture (3) 2024->
DELITE4 (4) 2024->
Homage4 (4) 2024->
LOAD4 60 (4) 2023->
LOAD4 75 (3) 2023->
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->
Multitinker (1) 2023->
NEVO4 (4) 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT 2025>
ROADSTER4 (4) 2024->
Swing4 2024->
Tinker2 (4) 2023->
Transporter2 65/85 2023->

For fixing the bracket and the screen.