Nevo

This right-side protective cover is an original manufacturer's part designed exclusively for the integration of the Bosch Performance Line CX (Generation 4) motor. It ensures a perfect finish while protecting the connectors and the motor block from external elements.

Compatibility:

Load4 60 (2023-2025)
Load4 75 (2023-2025)
Nevo3 (2021-2024)
Nevo4 (2024-2025)

The SP Connect Universal Holder is the perfect solution for attaching any smartphone to your bike without the need for a specific case. Its adjustable jaw system with a dial provides an ultra-secure hold, while allowing you to keep your usual protection.

• Total Compatibility: Adapts to all smartphone models (width between 70 and 85 mm)

Many Riese & Müller models (such as the Nevo, Charger, or Delite) already come with an SP Connect interface on the stem or handlebars. If this is the case for you, this clamp is the only accessory you need to immediately enjoy your GPS navigation without any additional installation.

For other bikes, this module requires the addition of an SP Connect mounting base (Handlebar Mount, Stem Mount, etc.) on your handlebars.

This rear wheel axle is the certified original part for Riese & Müller bicycles equipped with a Rohloff internal gear hub. This quick-release axle ensures perfect alignment of the rear wheel, essential for precise chain (or belt) line and smooth gear shifting.

Compatibility:

• Charger 3 GT Rohloff (2020-2022)
• Homage Gx Rohloff (2019-2020
  
• HOMAGE GT ROHLOFF (2021-2025)
  
• Homage GT ROHLOFF (2021-2025) DUAL
  
• LOAD 60 ROHLOFF (2020-2025)
  
• Load 75 Rohloff (2020-2025)
  
• Multicharger GT Rohloff (2021-2023)
  
• Nevo3 GT Rohloff 27.5 inches (2021-2024)
  
• Supercharger2 GT Rohloff (2020-2025)
  

This cable guide (or routing ring) is a part designed by Acros for headsets with integrated cable routing. Located under the top cap, it allows for neat organization and routing of brake, derailleur, and console cables into the frame, directly through the headset.

Compatible:

Charger 3 GT
Charger4
Charger5
Delite4 GT
Delite GT
Delite5
Homage GT
Homage4
Homage5
Multicharger GT
Multicharger2 Mixte GT
Nevo 3
Nevo3 GT
Nevo 4 GT
Supercharger 2 Gt
Superdelite GT
Superdelite5

This rear reflector is an essential safety feature for being seen from a distance by motorists. Its prismatic structure captures and reflects headlight light with maximum efficiency, ensuring your protection as soon as light levels drop.

Compatibility:

• CHARGER4 GT
• Culture
  
• Homage GT
  
• Load 60
  
• Load4 60
  
• Load 75
  
• Multicharger GT
  
• Multicharger2
  
• Nevo GT
  
• Nevo3 GT
  
• Packster 70
  
• Packster2
  

Spoke 256 Leader black 2.0 mm

Compatible with:

CHARGER4 VARIO (2023-2025)
Load II touring (2016-2019)
Load 75 touring (2019)
Multicharger Mixte Light (2019-2020)
NEVO TOURING WHITE 26" (2016-2018) size 43
Nevo GT touring 26 inch 2019-2020
Packster40 touring 2018-2020
Roadster vario 2021-2024
Roadster4 Mixte vario 2024-2025
Transporter2 65 touring 2023-2026

This tool is designed for the safe assembly and disassembly of the lockring on Bosch Performance Line (Gen3) motors. Thanks to the Cyclus Snap.in system, the tool is held under pressure against the motor, ensuring precise work without the risk of damaging parts.

Compatibility:

• E-bikes with Bosch Performance Line (Gen3) motors

This crankset (left and right) is the standard replacement for electric bikes equipped with Bosch Generation 2 motors. Forged from high-density aluminum, these FSA cranks are designed to withstand the specific stresses of powerful e-bikes. This is the ideal part if you need to replace your crankset due to a fall or damaged pedal thread.

Compatibility:

Nevo Nuvinci 28 inch (2016-2018)
NEVO TOURING WHITE 26" (2016-2018) size 43
Nevo GT touring 26 inch 2019-2020
Nevo Nuvinci 28 inch 2019-2020
Swing Nuvinci chain CX 28"

Spoke 256 Leader black 2.0 mm

Compatible with:

Multicharger
Nevo
Transporter2

The Nevo mudguard set from Riese & Müller is the essential accessory to keep your bike clean and protected in all circumstances.

Specifically designed for the Nevo5 model, this robust set offers complete protection against splashes of mud, water, and debris, ensuring cleaner and more enjoyable rides.

Mudguard set with all assembly parts included.

Compatible with: Nevo5 Riese & Müller

This original Bosch adapter is the technical solution for installing a shorter PowerTube battery into a housing designed for a larger capacity (for example, fitting a 500Wh into a frame designed for a 625Wh). It fills the empty space in the down tube while ensuring a perfect and secure hold for the battery, thus preventing vibrations and accidental disconnections.

This original Bosch adapter is the essential part for adapting the length of your PowerTube BES3 battery to your latest-generation Riese & Müller frame. It allows you to install a lower capacity battery (e.g., 500Wh in a 625Wh housing or 625Wh in a 750Wh housing) while ensuring rigid support and a perfect electrical connection.

Compatible with Riese & Müller:

• Charger4 /Charger4 mixed 2023->
• DELITE4 (4) 2024->
• Multicharger2 (3) 2024->
• NEVO4 (4) 27.5” 2023->
• PACKSTER2 70 2024->
• PACKSTER2 70 CT 2025->
• Roadster4 (4) 2024->

Mounting screws included

These 130mm Herrmans Nucore grips are the ideal choice for eliminating hand pain during your bike rides. Thanks to their wide "wing" shape, they perfectly support the palm and prevent tingling sensations.

Compatibility:

• This symmetrical model (two grips of the same size) is specifically recommended for bikes equipped with Rohloff, Pinion, or Automatiq systems, as well as for all Touring models.

Riese & Müller Dog leash

Stainless steel flat washer in A2 quality

• Available in various diameters.

Sold individually.

Stainless steel flat washer in A2 quality

• Size M8

Sold individually.

Improve the ergonomics and style of your bike with this original "Sport" kit. This pack is ideal for cyclists looking for a more dynamic and precise riding position without sacrificing comfort on long distances. It includes the Satori flat handlebar for better control and the Selle Royal Lookin Evo saddle, renowned for its superior cushioning.

Compatibility:

Compatible with all stems with a clamping diameter of 31.8 mm.

Enhance your riding experience with this official “Comfort” kit, designed to provide an upright and relaxed riding position. This kit is the perfect solution for cyclists looking to relieve tension in their back and wrists, thanks to a deeply curved handlebar and a saddle with a wider seat.

Compatibility :

• Charger5 with R&M custom 25.4mm stem
• Nevo5 with R&M custom 25.4mm stem

Specifically designed for the CORE models in the 2026 lineup, this “Comfort” kit allows you to adjust the riding position for a more upright and natural posture. Unlike the standard versions, this kit uses a 31.8 mm diameter handlebar to perfectly match the JD stem found on CORE models.

Compatibility :

• Charger5 CORE - 31,8 mm stem
  
• Nevo5 CORE - 31,8 mm stem

Optimize your well-being on the road with this genuine "Comfort" kit. Designed for those who prefer an upright riding position, this pack reduces pressure on the wrists and lower back. The Humpert Trekking handlebar offers a very pronounced angle for a natural grip, while the Lookin Evo Wide saddle ensures a royal seating experience.

Compatibility:

• All generations with 31.8 mm stem

Important Restriction: This kit is not compatible with GX models or models equipped with the Heavy-Duty-Package. These models require reinforced components specific to their approval.

The KLICKFIX PhonePad Loop is the most flexible mounting solution for your smartphone. Unlike fixed mounts, it uses a high-strength velcro fastening system, allowing you to attach or remove it in seconds without any tools.

• Total Compatibility: Adapts to all smartphone models

This expander increases the internal width of the mount from 55 mm to 100 mm, while moving it 41 mm away from the handlebars. This makes it compatible with very wide stems, such as the Riese & Müller Cockpit. It adapts to all clamp sizes.

Maximum load: 7 kg

This original control button is specifically designed for Riese & Müller High Speed (45 km/h) models. It activates the electric horn, which is mandatory on Speed Pedelecs. Featuring magnetic attachment and a 212mm cable, it installs discreetly on the left side of the handlebars for immediate thumb accessibility.

Compatibility:

• Riese & Müller High Speed models

Note: Delivered without clamp

This control button allows you to control the high beam lighting of your Riese & Müller bike. It is equipped with a 310 mm cable, ideal for installations requiring a longer wire length.

Compatibility:

• Only for Riese & Müller bikes that already have the high beam function. That is, the headlights: Supernova M99 Pro 2, M99 DY Pro, B54 Max and Mini 3 Pro.

Note: Delivered without clamp

The msh22 is an off-centre clamping bracket designed to accommodate magnetic high beam or horn push buttons. Its clever design allows for quick and ergonomic installation on the handlebar without having to remove your existing components.

Compatible with standard 22.0 mm handlebars at the grips.

This bracket is the "double" version of the MSH22. It allows you to group the high beam button and the horn button on a single mount. It's the perfect accessory to neatly organize your cockpit on a Riese & Müller High Speed bike.

Compatible with standard 22.0 mm handlebars at the grips.

This original push-button is the internal mechanism for securely opening and closing the integrated battery cover.

Battery cover compatibility:

• Nevo5
• Charger5

This kit allows you to quickly and securely attach your smartphone to almost any smooth, flat, non-porous surface. Designed for use in combination with SP Connect phone cases (SPC system), it offers a versatile mounting solution to keep your screen in view wherever you need it.

Compatibility:

• SP Connect phone cases

3M adhesive backing, supplied with screws and assembly instructions.

The SPC+ Universal Interface is the ideal solution to make any smartphone or case compatible with the SP Connect ecosystem. Thanks to its ultra-strong 3M™ adhesive and patented twist-to-lock mechanism, it ensures secure attachment with a simple quarter turn to all your mounts.

Compatibility:

• Universal Phone Cases

3M adhesive attachment, delivered with an assembly aid tool and instructions.

The Bosch Smartphone Grip Vertical is the perfect mount for attaching your phone to your Bosch SmartSystem-equipped e-bike. This mount securely holds your smartphone, with or without a case, while offering protection thanks to its rubber surface. The charging port and speaker remain accessible, and your phone can be recharged during your rides, whether by cable or induction.

The SmartphoneGrip Vertical transforms your smartphone into a true dashboard in portrait format. Ideal for natural reading of your navigation apps like Bosch eBike Flow or Komoot, this mount securely holds your phone while charging it (via induction or cable) during your rides.

Thanks to the Smart System's unified interface, switching from your Kiox 300 or Kiox 500 display to the SmartphoneGrip is done in a flash. On Riese & Müller bikes equipped with these displays, this mount installs directly onto your original single-arm mount, offering perfect integration and maximum stability on roads as well as on stabilized paths.

Maximize your ride time: The all-new Bosch 12A Fast Charger. True efficiency on the trails means spending more time riding and less time waiting. The new 12A Charger significantly reduces charging times for your eBike.

• Blazing Fast Charging: With a 500W power output, it charges approximately three times faster than the standard 4A charger.

• Proven Performance: A PowerTube 800 battery reaches 50% charge in just about one hour.

• Next-Gen GaN Technology: Utilizing modern Gallium Nitride semiconductors, this charger generates much less heat than traditional chargers, allowing for smart and efficient heat management.

• Lightweight & Portable: Despite its high power, the charger is compact and weighs less than 1 kg, fitting easily into your backpack or bike bag.

• Smart System Compatibility: Fully compatible with all Bosch batteries from the Smart System range.

• Availability: Expected to be available from early 2027.

Compatible with Riese&Müller:

CARRIE 2024->2025
CARRIE2
Charger4 /Charger4 mixte 2023->
Charger5 /  Charger5 mixte 2026->
Cruiser2 / Cruiser2 Mixte (3) 2023->
Culture / Culture Mixte (3) 2024->
DELITE4 (4) 2024->
DELITE5
Homage4 (4) 2024->
Homage5 (5) 2026->
LOAD4 60 (4) 2023->
LOAD4 75 (3) 2023->
LOAD5
LOAD5
Multicharger (2) (mixte) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->
Multitinker (1) 2023->
NEVO4 (4) 2023->
NEVO5 (5) 2026->
PACKSTER2 70 2024->
PACKSTER2 70 CT >
ROADSTER4 (4) 2024->
SUPERDELITE5
Swing4 2024->
Tinker2 (4) 2023->
Transporter2 65/85 2023->

The KLICKFIX handlebar mount is an essential accessory to instantly transform your bike (mountain, city, or electric) into a versatile utility vehicle. Whether you want to attach a shopping basket, a handlebar bag, or a map holder, this universal mount fits most handlebars on the market.

Maximum load: 7 kg

The KLICKFIX handlebar mount is the essential accessory to instantly transform your bike (mountain bike, city, or electric) into a versatile utility vehicle. Whether you want to install a shopping basket, a handlebar bag, or a map holder, this universal support fits most handlebars on the market. This version includes a key lock to secure your accessories against theft.

Maximum load: 7 kg

This power cable allows you to easily connect your front light to your electric bicycle's Bosch Smart System motor. Specifically designed to plug into the Bosch motor's Low Power Port, it ensures a stable and secure power transfer to your light.

Cable length: 1300mm

Original SR Suntour front wheel axle designed specifically to rigidly lock the front wheel into the brand's suspension forks. It ensures reliable, secure tightening with no mechanical play.

Ideal for replacing a worn axle on bikes equipped with an SR Suntour fork. It eliminates vibrations during braking and guarantees perfect alignment of your front wheel.

Dimensions:

• Be sure to measure the size of your current axle to be replaced: 145mm or 155mm