VAE system

The adapter attaches directly to the stem cap specifically designed for this model, ensuring stable and secure installation. Thanks to this configuration, the Bosch SmartphoneHub is positioned towards the front of the bike, optimizing available handlebar space.

Compatible with generation 2, 3, 4 motors.

(Note: if not original, compatible with modifications)

The spoke magnet for the Bosch eBike Smart System is an essential component to ensure precise synchronization between the speed sensor and the motor system of your electric bicycle.

Placed directly on the wheel spoke, this magnet transmits real-time speed data, allowing the motor to provide ideal electric assistance based on your cadence. Specially designed to work with the Bosch eBike Smart System, it guarantees perfect compatibility and optimal performance, thus contributing to a smooth and responsive ride.

Compatible for bikes with a speed sensor in the middle of the chainstay.

Compatible for:

CARRIE 2024->
Charger4 /Charger4 mixte 2023->
Cruiser2 / Cruiser2 Mixte (3) 2023->
Culture / Culture Mixte (3) 2024->
DELITE4 (4) 2024->
Homage4 (4) 2024->
LOAD4 60 (4) 2023->
LOAD4 75 (3) 2023->
Multicharger (2) (also mixte) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->
Multitinker (1) 2023->
NEVO4 (4) 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT >
ROADSTER4 (4) 2024->
Swing4 2024->
Tinker2 (4) 2023->
Transporter2 65/85 2023->

The spoke magnet for Bosch eBike System 2 (BES2) is designed to work in tandem with your e-bike's original speed sensor.

Attached to the wheel spoke, this magnet transmits accurate data to the control system, allowing the motor to adjust electric assistance based on speed and cadence. Designed for perfect compatibility with the Bosch eBike System 2, this magnet ensures a smooth and responsive ride, guaranteeing optimal performance on every outing.

Compatible with generation 2, 3, 4 motors.

Compatible with:

Charger (1) / mixed charger 2014-2018
Charger (2) called NEW CHARGER / NEW Mixed Charger 2018-2020
Charger3/mixed charger3 2020-2022
Cruiser/Cruiser mixed Hybrid (1) 2014
Cruiser/Cruiser mixed (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (formerly PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(note: if not original, compatible with modifications)

The 6-hole disc magnet for Bosch eBike (BES2 and SmartSystem) is specifically designed for direct installation on the 6-hole brake discs of your e-bike.

This magnet ensures precise transmission of speed data to the Bosch eBike system, allowing for electric assistance perfectly adapted to your real-time needs. Thanks to its robust design and compatibility with the Bosch system, this magnet guarantees reliable and durable performance, even on challenging terrains.

Compatible with Generation 3, 4 Bosch eBike System 2 (BES2) and Generation 3 Smart System.

Compatible with:

Carrie 2024-
Charger4/Charger4 Mixte 2023-
Culture (3) 2023-
DELITE (4) 2024-
Homage (4) 2024-
LOAD60 (4) 2023-
LOAD75 (4) 2023-
Multicharger2 (3) (also Mixte) 2024-
Multitinker (1) 2023-
NEVO (4) 2024-
PACKSTER2 70 2024-
ROADSTER (3) 2021-2024
ROADSTER (4) 2024-

Discover the Purion 200 Bosch eBike Battery, designed to deliver exceptional performance and a long lifespan.
Comes with battery, cover, and seal.

Compatible with models equipped with PURION200

CARRIE 2024->
Charger4 /Charger4 mixte 2023->
Cruiser2 / Cruiser2 Mixte (3) 2023->
Culture / Culture Mixte (3) 2024->
DELITE4 (4) 2024->
Homage4 (4) 2024->
LOAD4 60 (4) 2023->
LOAD4 75 (3) 2023->
Multicharger (2) (also in mixed) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->
Multitinker (1) 2023->
NEVO4 (4) 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT 2025->
ROADSTER4 (4) 2024->
Swing4 2024->
Tinker2 (4) 2023->
Transporter2 65/85 2023->

Simplified Installation and Guaranteed Discretion

The BikeTrax GPS tracker is designed to provide effective and invisible protection against theft. Easy to install, it plugs directly into your e-bike's battery module. Its compact size allows it to blend discreetly into the engine compartment, making it virtually impossible to detect.

Continuous Monitoring via Mobile Application

Enjoy peace of mind with real-time tracking of your e-bike, accessible 24/7 via our free app, available on iOS and Android. For 12 months, enjoy a free subscription and monitor your bike's location at any time, wherever you are.

Instant Alert in Case of Suspicious Movement

Effectively protect your bike against theft with a real-time notification system. In the event of unauthorized tampering or movement, you'll immediately receive an alert via the app. Using the mobile network, the BikeTrax tracker guarantees precise and responsive tracking, constantly informing you of the exact location of your e-bike.

1st year of subscription free
Afterwards:
Cancellable monthly subscription: EUR 3.95 per month
Annual subscription: EUR 39.50 per year
(The fee is incurred because a mobile phone contract with a SIM card is concluded in the background. This is necessary because data transmission from BikeTrax to the server takes place via mobile internet.)

Compatible with:
Charger (1) / charger mixte 2014-2018
Charger (2) appelé NEW CHARGER / NEW Charger mixte 2018-2020
Cruiser/Cruiser mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
Homage (1) 2015-2018
Homage (2) 2019-2020
LOAD (2) (LOAD60) 2016-2019
LOAD75 (1) 2019
Multicharger (1) (aussi en mixte) 2019-2020
NEVO (1) 2016-2018
NEVO (2) 2019-2020
Packster40 2018-2020
PACKSTER (puis packster60) 2017-2020
PACKSTER80 2018-2020
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
Supercharger (1) 2018-2019
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (appelé PONY à l'époque) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

Simplified Installation and Guaranteed Discretion

The BikeTrax GPS tracker is designed to provide effective and invisible protection against theft. Easy to install, it plugs directly into the battery module of your electric bike. Its compact size allows it to blend discreetly into the engine compartment, making its detection virtually impossible.

Continuous Monitoring via Mobile Application

Enjoy peace of mind with real-time tracking of your electric bike, accessible 24/7 via our free app, available on iOS and Android. For 12 months, enjoy a free subscription and monitor the position of your bike at any time, wherever you are.

Instant Alert on Suspicious Movement

Effectively protect your bike against theft thanks to a real-time notification system. In the event of unauthorized manipulation or movement, you will immediately receive an alert via the application. Using the mobile network, the BikeTrax tracker guarantees precise and responsive tracking, constantly informing you of the exact location of your e-bike.

Compatible with: 

Charger3/charger3 mixte 2020-2022
DELITE (3) 2020->
Homage (3) 2021-2025
LOAD60 (3) 2020->
LOAD75 (2) 2020->
Multicharger (2) (aussi en mixte) (pre-Multicharger2 2021-2023
NEVO (3) 2021-2024
PACKSTER70 2021-2024
ROADSTER (3) 2021-2024
Supercharger2 (2) 2025-2020
Superdelite (1) 2020-2025

Ignition button for omni B/C Stromer .

Plastic and rubber ignition button for Stromer electric bikes:
Stromer ST1
Stromer ST2
Stromer ST3 (excluding Pinion)
Stromer ST5 (excluding ST5 ABS and Pinion)

Suitable for PURION200, KIOX300, KIOX400C, KIOX500 displays, LED REMOTE remote controls, SYSTEM CONTROLLER and ConnectModule

If a display (Purion 400, Kiox 300, Kiox 500, SmartphoneGrip) is subsequently mounted with a Y-cable, a blanking plug must be ordered separately to lock the unused display port on the display mount / Purion 400.

PowerMore cable, cable routing to battery holder
Compatible for:

Charger4/charger4 mixed 2023->
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->

The Active Line logo cover is a refined finishing accessory, specially designed for bikes equipped with the Bosch Active Line SmartSystem motor.

It mounts directly onto the motor, offering both additional protection and a neat aesthetic touch.

The Active Line Plus logo cover is a stylish finishing touch designed for bikes equipped with the Bosch Active Line Plus SmartSystem motor.

Mounts directly onto the motor.

The Cargo Line logo cover is a robust finishing element designed for bikes equipped with the Bosch Cargo Line SmartSystem motor.

It attaches directly to the motor, providing reliable protection while adding a refined aesthetic touch to your cargo bike.

The Performance Line logo cover is an elegant finishing element, designed specifically for bikes equipped with the Bosch Performance Line SmartSystem motor.

It installs directly on the motor, offering effective protection while adding an aesthetic touch to your bike.

The Performance Line CX logo cover is a sophisticated finishing touch, specially designed for bikes equipped with the Bosch Performance Line CX SmartSystem motor.

It easily attaches to the motor, offering both durable protection and an aesthetic touch to your bike.

This rubber cover is designed to protect your Bosch eBike battery charging port from external elements such as dust, moisture, and debris. By providing a waterproof and durable barrier, it helps extend the lifespan of your battery while maintaining its optimal performance.

Compatible with Generation 2, 3, and 4 motors.

Compatible with:
Charger (1) / Charger Mixte 2014-2018
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
DELITE (1) 2014-2016
DELITE (2) 2017-2019
Homage (1) 2015-2018
Homage (2) 2019-2020
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
NEVO (1) 2016-2018
Packster40 2018-2020
PACKSTER (then Packster60) 2017-2020
PACKSTER80 2018-2020
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

Effectively protect your Bosch battery charging port with this rubber cover specifically designed for rack-mounted batteries. This robust cap provides optimal protection against bad weather, dust, and humidity, thus preserving the longevity and performance of your battery.

Compatible with Generation 2, 3, 4 motors.

Compatible with:

Culture (1) 2015-2020
Culture GT (2) 2019-2020
Swing 2014-2019
Swing3 2020-2024

Protect your Intuvia display with the Bosch Intuvia bezel cover.

Designed to fit perfectly around the display, this cover offers extra protection against shocks and scratches, while improving the appearance of your electric bike. Easy to install, it helps extend the life of your Intuvia display while keeping it looking new and tidy.

Anthracite. Compatible with generation 2, 3, 4 motors.

Compatible with:

Charger (1) / Charger Mixte 2014-2018
Charger (2) called NEW CHARGER / NEW Charger Mixte 2018-2020
Charger3/Charger3 Mixte 2020-2022
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixte) 2019-2020
Multicharger (2) (also mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (formerly PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(Note: if not original, compatible with modifications)

Effectively protect your Nyon display with this bezel cover specially designed by Bosch.

In addition to preventing scratches and impacts, this cover adds an elegant finish to your electric bike. Its quick installation and precise fit guarantee durable protection while maintaining the high-end appearance of your Nyon Bosch display.

Anthracite. Compatible with generation 2, 3, 4 motors.

Compatible with:

Charger (1) / Charger mixte 2014-2018
Charger (2) called NEW CHARGER / NEW Charger mixte 2018-2020
Charger3/Charger3 mixte 2020-2022
Cruiser/Cruiser mixte Hybrid (1) 2014
Cruiser/Cruiser mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixte) 2019-2020
Multicharger (2) (also mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then Packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(Please note: if not original, compatible with modifications)

Protect and enhance your Purion display with the Bosch Purion display frame cover.

Designed to fit perfectly around the display, this flat cover provides extra protection against bumps and scratches while adding an aesthetic touch to your electric bike. Easy to install, it maintains the integrity of your Purion display, extending its lifespan and preserving its appearance.

Anthracite. Compatible with Bosch Generation 2, 3, 4 motors.

Compatible with:

Charger (1) / Charger Mixte 2014-2018
Charger (2) also called NEW CHARGER / NEW Charger Mixte 2018-2020
Charger3/Charger3 Mixte 2020-2022
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also in mixte) 2019-2020
Multicharger (2) (also in mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then Packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(Note: if not original, compatible with modifications)

Protect and enhance your Purion display with the Bosch Purion display frame cover.

Designed to fit perfectly around the display, this frame cover provides additional protection against bumps and scratches while adding an aesthetic touch to your e-bike. Easy to install, it maintains the integrity of your Purion display, extending its lifespan and preserving its appearance.

Frame. Compatible with generation 2, 3, 4 motors.

Compatible with:

Charger (1) / Charger Mixte 2014-2018
Charger (2) called NEW CHARGER / NEW Charger Mixte 2018-2020
Charger3/Charger3 Mixte 2020-2022
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixte) 2019-2020
Multicharger (2) (also mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then Packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (then called PONY) 2015-2016
Tinker (2) (formerly PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(Note: if not original, compatible with modifications)

The spindle cover for Bosch eBike System 2 is designed to effectively protect your e-bike's connection pins. It prevents the accumulation of dust, dirt, and moisture, thus ensuring a clean and reliable connection for optimal system performance.

Generation 2, 3, 4 motors

The PowerTube pin cover for Bosch eBike SmartSystem is designed to protect the PowerTube battery's connection pins. It prevents the intrusion of dust, moisture, and other debris, ensuring a reliable and long-lasting connection.

This robust cover is easy to install, providing optimal protection to preserve the performance of your Bosch eBike SmartSystem and extend battery life.

Compatible with:

Charger4/Charger4 Mixte 2023->
Delite (4) 2024->
Homage4 (4) 2024->
Homage5 BOSCH 2025->
Multicharger 2 (3) 2024->
Multitinker (1) 2023->
NEVO (4) 2024->
Packster 2 70 2024->
Roadster4 (4) 2024->

The pin cover for the Bosch eBike System 2 (BES2) charging socket is designed to protect the connection pin of your e-bike's charging socket. It provides effective protection against dust, moisture, and debris, thus extending the lifespan of your charging system.

Compatible with:

Charger (1) / Charger Mixte 2014-2018
Charger (2) called NEW CHARGER / NEW Charger Mixte 2018-2020
Charger3/Charger3 Mixte 2020-2022
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixte) 2019-2020
Multicharger (2) (also mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (then called PONY) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(Please note: if not original, compatible with modifications)

Kiox smartsystem stem cover

Compatible for:

Charger4 /Charger4 mixed 2023->
DELITE4 (4) 2024->
Homage4 (4) 2024->
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->
NEVO4 (4) 2023->

The 615 mm speed sensor for Bosch eBike System 2 (BES2) is an essential component for accurately measuring your electric bike's speed. Designed to work in harmony with the Bosch system, it ensures smooth and reliable transmission of speed data to the motor, thus optimizing electric assistance based on your cadence.

Cable and connector included. Compatible with Gen 2, 3, 4 motors.

Compatible with Riese & Müller: 

Charger (1) 2014-2018
Charger (2) NEW CHARGER 2018-2020
Charger3/charger3 mixte 2020-2022
Culture (1) 2015-2020
Culture GT 2019-2020
Cruiser/Cruiser mixte (2) 2015-2024
Delite (1) 2014-2016
Delite (2) 2017-2019
Delite (3) 2020->
Homage (1) 2015-2018
Homage 3 2021->
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) (2020->
Multicharger (1) 2019-2020
Multicharger (2) 2021-2023
Nevo(1) 2016-2018
Nevo(2) 2019-2020
NEVO(3) 2021-2024
Packster40 2018-2020
Packster 60 2017-2020
Packster 80 2018-2020
Packster 70 2021-2024
Roadster(2) 2018-2020
Supercharger (1) 2018-2019
Supercharger2(2) 2020->
Superdelite(1) 2020->
Swing 2014-2019
Swing 3 2020-2024
Tinker(1) 2015-2016
Tinker (2)  (ex PONY) 2017-2020
Tinker (3) 2021-2023
Tinker2 (4) 2023->
Transporter 65/85 2023->

The Bosch 4A Smart System Charger is designed to meet the needs of e-bike users looking for a fast and convenient charging solution. With its many benefits, this charger stands out as an essential choice for keeping your eBike in top shape.

With its 4 amp output, this Bosch charger guarantees a fast recharge of your PowerTube 750Wh battery. It only takes six hours for a full charge, and just over two hours to reach 50% charge, allowing you to get back on the road in no time. This efficiency is particularly appreciated by those who use their eBike regularly and do not want to waste time waiting.

The Bosch 4A Smart System charger is not only powerful, but also extremely practical. Its compact and lightweight design makes it an ideal travel companion, easy to carry wherever you go. Whether you’re travelling for work or on holiday, this charger fits easily into a bag, giving you the peace of mind that you can always charge your e-bike.

Comes with instructions for use. Compatible with generation 2, 3, 4 engines.

Standard European plug

Compatible for:

CARRIE 2024->
Charger4 /Charger4 mixed 2023->
Cruiser2 / Cruiser2 Mixed (3) 2023->
Culture / Mixed Culture (3) 2024->
DELITE4 (4) 2024->
Homage4 (4) 2024->
LOAD4 60 (4) 2023->
LOAD4 75 (3) 2023->
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->
Multitinker (1) 2023->
NEVO4 (4) 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT >
ROADSTER4 (4) 2024->
Swing4 2024->
Tinker2 (4) 2023->
Transporter2 65/85 2023->

!!! UK plug !!!

The Bosch 4A Smart System Charger is designed to meet the needs of e-bike users looking for a fast and convenient charging solution. With its many benefits, this charger stands out as an essential choice for keeping your eBike in top shape.

With its 4 amp output, this Bosch charger guarantees a fast recharge of your PowerTube 750Wh battery. It only takes six hours for a full charge, and just over two hours to reach 50% charge, allowing you to get back on the road in no time. This efficiency is particularly appreciated by those who use their eBike regularly and do not want to waste time waiting.

The Bosch 4A Smart System charger is not only powerful, but also extremely practical. Its compact and lightweight design makes it an ideal travel companion, easy to carry wherever you go. Whether you’re travelling for work or on holiday, this charger fits easily into a bag, giving you the peace of mind that you can always charge your e-bike.

Comes with instructions for use. 

Compatible for:

CARRIE 2024->
Charger4 /Charger4 mixed 2023->
Cruiser2 / Cruiser2 Mixed (3) 2023->
Culture / Mixed Culture (3) 2024->
DELITE4 (4) 2024->
Homage4 (4) 2024->
LOAD4 60 (4) 2023->
LOAD4 75 (3) 2023->
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->
Multitinker (1) 2023->
NEVO4 (4) 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT >
ROADSTER4 (4) 2024->
Swing4 2024->
Tinker2 (4) 2023->
Transporter2 65/85 2023->

This compact and quiet charger is ideal for everyday use. Thanks to its small size, it is easy to carry, even at work, without taking up space.

Stromer chargers are equipped with a clear LED indicator to monitor the battery status. When the charger is properly connected, a flashing green light indicates that the battery is charging. Once the battery is fully charged, the light turns solid green. In the event of an error, a red light will illuminate to indicate a problem.

model for Europe 230V  not compatible in US

Model CR245 designed for the USA.
This compact and quiet charger is ideal for everyday use. Thanks to its small size, it is easy to carry, even at work, without taking up space.

Stromer chargers are equipped with a clear LED indicator to monitor the battery status. When the charger is properly connected, a flashing green light indicates that the battery is charging. Once the battery is fully charged, the light turns solid green. In the event of an error, a red light will illuminate to indicate a problem.

The Bosch eBike 2A compact charger is the ideal accessory for those looking for a portable and easy-to-carry charging solution.

Designed for nomadic cyclists, this lightweight charger ensures reliable charging while taking up minimal space. With a power of 2A, it offers a slower but gentle charge, thus preserving the longevity of your Bosch eBike battery. Perfect for daily commutes or to take with you on your travels, the compact 2A is a practical solution to ensure that your electric bike is always ready to go.

Comes with instructions for use. Compatible with generation 2, 3, 4 motors.

Compatible with Riese & Müller:

Charger (1) / Charger Mixte 2014-2018
Charger (2) called NEW CHARGER / NEW Charger Mixte 2018-2020
Charger3/Charger3 Mixte 2020-2022
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also as Mixte) 2019-2020
Multicharger (2) (also as Mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then Packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(note: if not original, compatible with modifications)

The Fazua 3A charger is the official solution for quickly and safely charging your Fazua Ride 60 system batteries.

Compact and lightweight, it is designed for Energy 430 and Energy 480 batteries, offering a perfect balance between charging speed and cell lifespan preservation.

WARNING: This product includes only the charger unit. The AC power cable (wall plug) is not included in this package.

Cable available on our website (depending on the country).

Comes with user instructions.

Compatible with Riese & Müller:

• UBN FIVE
• UBN SIX
• UBN SEVEN

Enjoy a high-performance 460 Wh battery that can fully charge in just 4 hours—a must-have for e-bikes that are used intensively or require a quick restart. You have the freedom to charge the battery directly on the bike or after removing it, whichever suits you best.

This smart charger, fully compatible with all 48V FIT 2.0 batteries, uses CAN communication technology to continuously monitor the battery's condition during the charging process. The result: enhanced safety and optimal protection against the risk of overheating or cell damage. Thanks to its ability to automatically adapt the current based on cell condition, it guarantees a longer battery life.

The charger delivers a powerful 4.8A current, enabling fast charging without compromising safety. Once the battery is fully charged, the system automatically shuts off. Clear LED indicators keep you informed of the charging status in real time, and the power cable is of course included for immediate use.

Compatible :

Delite5 PINION 2025->
Homage5 PINION 2025->

DISCONTINUED - No longer available for sale

The Bosch eBike System 2 Fast Charger 6A is the ideal tool for demanding cyclists who want to maximize their time on the road.

With its fast charging capability, this powerful charger significantly reduces the charging time of your Bosch eBike battery. Compatible with the Bosch eBike System 2, it charges your batteries safely and efficiently, while being compact and easy to transport. Whether you're on the go or at home, this charger is the essential accessory for long, uninterrupted journeys.

Comes with instructions for use

Compatible with:

Charger (1) / mixed charger 2014-2018
Charger (2) called NEW CHARGER / NEW Charger mixed 2018-2020
Charger3/charger3 mixed 2020-2022
Cruiser/Cruiser Mix Hybrid (1) 2014
Cruiser/Mixed Cruiser (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixed) 2019-2020
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(attention if not original, compatible with modifications)

Maximize your ride time: The all-new Bosch 12A Fast Charger. True efficiency on the trails means spending more time riding and less time waiting. The new 12A Charger significantly reduces charging times for your eBike.

• Blazing Fast Charging: With a 500W power output, it charges approximately three times faster than the standard 4A charger.

• Proven Performance: A PowerTube 800 battery reaches 50% charge in just about one hour.

• Next-Gen GaN Technology: Utilizing modern Gallium Nitride semiconductors, this charger generates much less heat than traditional chargers, allowing for smart and efficient heat management.

• Lightweight & Portable: Despite its high power, the charger is compact and weighs less than 1 kg, fitting easily into your backpack or bike bag.

• Smart System Compatibility: Fully compatible with all Bosch batteries from the Smart System range.

• Availability: Expected to be available from early 2027.

Compatible with Riese&Müller:

CARRIE 2024->2025
CARRIE2
Charger4 /Charger4 mixte 2023->
Charger5 /  Charger5 mixte 2026->
Cruiser2 / Cruiser2 Mixte (3) 2023->
Culture / Culture Mixte (3) 2024->
DELITE4 (4) 2024->
DELITE5
Homage4 (4) 2024->
Homage5 (5) 2026->
LOAD4 60 (4) 2023->
LOAD4 75 (3) 2023->
LOAD5
LOAD5
Multicharger (2) (mixte) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->
Multitinker (1) 2023->
NEVO4 (4) 2023->
NEVO5 (5) 2026->
PACKSTER2 70 2024->
PACKSTER2 70 CT >
ROADSTER4 (4) 2024->
SUPERDELITE5
Swing4 2024->
Tinker2 (4) 2023->
Transporter2 65/85 2023->

The standard 4A Bosch eBike charger is designed to provide fast and reliable charging while remaining compact and easy to transport.

Suitable for most Bosch eBike batteries, this charger combines efficiency and practicality, reducing charging time so you can get back on the road faster. With its 4A power, it ensures a perfect balance between charging time and portability, ideal for daily commutes and long rides.

Comes with instructions for use. Compatible with generation 2, 3, 4.

Compatible with Riese & Müller:

Charger (1) / Charger Mixte 2014-2018
Charger (2) called NEW CHARGER / NEW Charger Mixte 2018-2020
Charger3/Charger3 Mixte 2020-2022
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also Mixte) 2019-2020
Multicharger (2) (also Mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then Packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(Please note: if not original, compatible with modifications)

The Bosch remote control is the essential tool for centralizing the controls of your electric bike.

Connect both your control display and your compatible motor for a simplified riding experience. Change motor power, activate various functions, and interact with your display, all while keeping your hands safely on the handlebars. Enjoy a smooth and perfectly controlled ride!

290 mm cable. Compatible with generation 2, 3, 4 motors.

Compatible with:

Charger (1) / Charger Mixte 2014-2018
Charger (2) also called NEW CHARGER / NEW Charger Mixte 2018-2020
Charger3/Charger3 Mixte 2020-2022
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixte) 2019-2020
Multicharger (2) (also mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(Note: if not original, compatible with modifications)

The Bosch remote control is an essential accessory for optimizing the control of your electric bike.

It centralizes interactions with the control screen and compatible motor, providing a smooth and intuitive riding experience. Adjust motor power, activate various features, and navigate your screen while keeping your hands firmly positioned on the handlebars. Enjoy safe, relaxed, and fully controlled riding!

350 mm cable. Compatible with generation 2, 3, and 4 motors.

This Bosch control unit allows you to easily select the assistance level of your e-bike equipped with an Intuvia display.

Designed to be installed on the left side of the handlebars with a clamp, it is a perfect replacement for the original control unit. Specifically compatible with Bosch Intuvia displays, it features large, ergonomic buttons for quick and easy mode changes. The kit includes the necessary gaskets and screws for complete installation.

Compatible with Classic+ motors and generations 2, 3, 4.

Compatible with:

Charger (1) / Charger Mixte 2014-2018
Charger (2) called NEW CHARGER / NEW Charger Mixte 2018-2020
Charger3/Charger3 Mixte 2020-2022
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixte) 2019-2020
Multicharger (2) (also mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then Packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (then called PONY) 2015-2016
Tinker (2) (formerly PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(Please note: if not original, compatible with modifications)

Optimize your E-Bike's use with the Bosch remote control unit, compatible with Bosch Active, Active Plus, Performance, and Performance CX systems. Designed to work in perfect harmony with the Bosch Nyon on-board computer, this remote control unit attaches directly to your handlebars, offering intuitive and secure access to all essential functions of your electric bike.

Thanks to this remote control unit, you can easily interact with the Bosch Nyon on-board computer without ever taking your eyes off the road. Adjust settings, change assistance modes, view your riding statistics, or use the navigation system, all with a simple gesture. This control ensures that you will always keep both hands on the handlebars, thus ensuring safer and more comfortable riding.

The Bosch Nyon remote control kit includes everything needed for quick and easy installation: a robust connection cable, a seal to protect against the elements, and fixing screws for secure installation. This accessory is essential for cyclists looking to maximize their bike's functionality while maintaining optimal safety.

Comes with spacer, gasket, and screws. Compatible with Generation 2, 3, 4 motors.

Compatible with:

Charger (1) / Charger Mixte 2014-2018
Charger (2) also called NEW CHARGER / NEW Charger Mixte 2018-2020
Charger3/Charger3 Mixte 2020-2022
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixte) 2019-2020
Multicharger (2) (also mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then Packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(Please note: if not original, compatible with modifications)

The remote control for Stromer ST3, ST3 Pinion, ST5, ST5 ABS, ST5 Pinion, and ST7 models allows you to easily adjust the electric assistance level and your bike's lighting without taking your hands off the handlebars.

Its ergonomic design ensures quick and intuitive access to controls, allowing you to adjust motor assistance or activate headlights safely, even while on the move.

Protect your Kiox 300 display with this robust and reliable protective case. Designed to perfectly fit your device, it offers effective defense against shocks, scratches, and bad weather.

Thanks to this case, your Kiox 300 remains intact and functional, even in the most demanding conditions. Easy to install and remove, this protection guarantees a long lifespan for your display, while maintaining smooth and precise use.

KIOX 300 SILICONE PROTECTION - MH COVER

Compatible with:

CARRIE 2024->
Charger4 /Charger4 mixed 2023->
Cruiser2 / Cruiser2 Mixed (3) 2023->
Culture / Culture Mixed (3) 2024->
DELITE4 (4) 2024->
Homage4 (4) 2024->
LOAD4 60 (4) 2023->
LOAD4 75 (3) 2023->
Multicharger (2) (also mixed) (pre-Multicharger2 2021-2023
Multicharger2 (3) 2024->
Multitinker (1) 2023->
NEVO4 (4) 2023->
PACKSTER2 70 2024->
PACKSTER2 70 CT 2025->
ROADSTER4 (4) 2024->
Swing4 2024->
Tinker2 (4) 2023->
Transporter2 65/85 2023->

The battery cover for the Purion display is specially designed to protect your display's battery from dust, moisture, and impact.

Comes with seal included. Compatible with Generation 2, 3, 4 motors.

Compatible with:

Charger (1) / Charger Mixte 2014-2018
Charger (2) also known as NEW CHARGER / NEW Charger Mixte 2018-2020
Charger3/Charger3 Mixte 2020-2022
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixte) 2019-2020
Multicharger (2) (also mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then Packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (formerly PONY) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(Please note: if not original, compatible with modifications)

Rubber cover designed to protect the charging port from dust, moisture, and other external elements, this durable cover helps extend the lifespan of your battery and maintain its performance.

Easy to install and perfectly fitted, it ensures effective sealing while remaining discreet on your electric bike. Compatible with generation 2, 3, 4 motors.

Compatible with:

Vertical Powertube:

Charger (2) called NEW CHARGER / NEW Charger mixte 2018-2020
Charger3/charger3 mixte 2020-2022
DELITE (3) 2020->
Multicharger (1) (also in mixte) 2019-2020
Multicharger (2) (also in mixte) (pre-Multicharger2 2021-2023
PACKSTER70 2021-2024
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->

Horizontal Powertube:
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
NEVO (2) 2019-2020
NEVO (3) 2021-2024

Protective cover for universal charger socket, compatible with all Stromer models except ST7. Designed to protect the socket from dust and moisture, it ensures a long lifespan for your charger. Easy installation for discreet and effective protection.

Designed to deliver an intuitive and enjoyable user experience, this 3.5-inch color display guarantees exceptional readability in all lighting conditions. Thanks to its scratch-resistant, anti-glare surface and intelligent backlighting, it remains perfectly readable, day or night, in rain or in direct sunlight.

Although it doesn't feature touch input, it's still smooth to use thanks to a separate, ergonomic controller. Plus, integrated Bluetooth connectivity provides access to a wide range of additional features for even more precise and connected riding of your e-bike.

• 3.5" color screen with clear, readable display in all circumstances

• Anti-glare and scratch-resistant surface , ideal for intensive use

• Intuitive manual control , perfect even with gloves

• Flexible mounting : removable or fixed with fixing screws

• Brightness adjustable automatically or manually

• Real-time estimation of remaining autonomy

• Display of the four levels of assistance available on the bike

• Plug-and-play system : easily interchangeable with another FIT screen (one-time activation via the Maintenance Tool by an authorized reseller)

• Advanced Data Display :

  • Calories burned

  • Level of effort

  • Room temperature

  • Pedaling cadence

  • Altimeter with slope indicator

• Compatible with FIT accessories :

  • Heart rate display (with optional heart rate monitor)

  • Tire pressure display (with optional FIT sensors)

• Turn-by-turn navigation for clear and precise guidance

• Bluetooth connection with the FIT E-Bike system for synchronization of all essential data

Compatible :

Delite5 PINION 2025->
Homage5 PINION 2025->

The FIT Display Compact, despite its small 2-inch size, makes no compromises on functionality. Extremely easy to handle and integrate into your e-bike cockpit, it stands out for its versatility: you can install it permanently or use it as a plug-and-play version, with a simple one-time activation via the Maintenance Tool by a specialized dealer.

Compact yet complete, it offers the same features as larger screens in the range, with optimal readability in all lighting conditions. It does not have touch control, but its use remains intuitive thanks to a clear and ergonomic interface.

• 2’’ color display compact and discreet, perfect for uncluttered handlebars

• Clear display perfectly readable day and night, even with polarized sunglasses

• Anti-glare and scratch-resistant glass, suitable for outdoor use

• Manual brightness adjustment for personalized visual comfort

• Accurate predictions of remaining range depending on the mode used

• Display of the 4 FIT system assistance levels

• Plug-and-play system: interchangeable with other FIT screens (one-time activation required via the Maintenance Tool)

• Complete data displayed:

  • Calories burned

  • Effort intensity

  • Outside temperature

  • Pedaling cadence

  • Altimeter with incline indicator

• Display up to two batteries simultaneously

• Heart rate tracking (with optional heart rate monitor)

• Turn-by-turn navigation to easily follow a route

• Tire pressure indication (with optional FIT sensors)

• Bluetooth connection integrated into the FIT E-Bike System, for full compatibility with your sensors and accessories

Compatible with:

Delite5 PINION
Homage5 PINION
Charger5 PINION
Nevo5 PINION

User Manual

The Intuvia bike computer from Bosch eBike makes managing your e-bike simple and intuitive. Its clear display remains readable in all light conditions, allowing you to easily view essential information. Thanks to the separate control unit, you can control all functions without taking your hands off the handlebars, improving your safety.

The gear shift recommendation indicator optimizes your cadence to preserve the battery, thus extending your e-bike's range. With Intuvia, you always have total control for a smoother and safer ride.

Anthracite

Supplied with user manual. Compatible with Classic+ and Generation 2, 3, 4 motors.

Compatible with:

Charger (1) / Charger Mixte 2014-2018
Charger (2) also known as NEW CHARGER / NEW Charger Mixte 2018-2020
Charger3/Charger3 Mixte 2020-2022
Cruiser/Cruiser Mixte Hybrid (1) 2014
Cruiser/Cruiser Mixte (2) 2015-2024
Culture (1) 2015-2020
Culture GT (2) 2019-2020
DELITE (1) 2014-2016
DELITE (2) 2017-2019
DELITE (3) 2020->
Homage (1) 2015-2018
Homage (2) 2019-2020
Homage (3) 2021->
LOAD (1) (LOAD60) 2014-2015
LOAD (2) (LOAD60) 2016-2019
LOAD60 (3) 2020->
LOAD75 (1) 2019
LOAD75 (2) 2020->
Multicharger (1) (also mixte) 2019-2020
Multicharger (2) (also mixte) (pre-Multicharger2 2021-2023
NEVO (1) 2016-2018
NEVO (2) 2019-2020
NEVO (3) 2021-2024
Packster40 2018-2020
PACKSTER (then Packster60) 2017-2020
PACKSTER80 2018-2020
PACKSTER70 2021-2024
ROADSTER (1) 2016-2017
ROADSTER (2) 2018-2020
ROADSTER (3) 2021-2024
Supercharger (1) 2018-2019
Supercharger2 (2) 2020->
Superdelite (1) 2020->
Swing 2014-2019
Swing3 2020-2024
Tinker (1) (called PONY at the time) 2015-2016
Tinker (2) (ex PONY) 2017-2020
Tinker (3) 2021-2023
Transporter 65/85 2023->

(note: if not original, compatible with modifications)

The Bosch Intuvia 100 console represents a significant evolution of the first generation Intuvia display, now integrating compatibility with the Bosch Smart System . Designed to offer clear reading and optimal user comfort, this central display stands out for its simplicity and ergonomics. It is easily controlled thanks to an intelligent remote control, the LED Remote , or via the more minimalist option, the Mini Remote , all with a wireless connection via Bluetooth .

With its intuitive interface and improved display, the Intuvia 100 remains faithful to the spirit of its predecessor while bringing notable innovations. Its new, more modern and refined design is accompanied by a more powerful processor , guaranteeing increased responsiveness. Its 2.5-inch black and white screen offers optimized contrast , allowing perfect readability whatever the lighting conditions. Its large characters bring a pleasant retro touch, while reinforcing visual comfort for a fluid and natural use.